Installing the ScrewDrivers Gateway
The Gateway server enables Enterprise edition's mobile printing and TCP/IP client functionality; the Cloud Connector service adds remote/cloud printing. Both are Enterprise only — skip this page on Pro or Essentials.
Step 1: Prepare the Gateway server
- Windows Server 2016 or newer, with .NET 4.8 installed.
- Network connectivity to your SQL Server and License Server.
- Firewall rules:
- Inbound 4600 (default) for client connections (TCP/IP clients, non-Windows platforms, and mobile) — TLS 1.2 secured
- Cloud Connector deployments additionally use 5550/5551 — see Ports and Firewall Rules
Step 2: Install the Gateway services
- Run the installer locally (
ScrewDriversProOrEnterprise_<version>_x64.exe) as administrator. - In the wizard:
- Component selection: check Gateway Service, and Cloud Connector Service if you're using remote/cloud printing.
- Database connection: enter your SQL Server details and click Test Connection.
- License configuration: License Server address or nodelock key — an Enterprise license is required.
- Gateway configuration: the client port (4600 default) and Cloud Connector enablement if you're using remote/cloud printing.
- Accept the default path and install; reboot if prompted.
- Verify the services:
Get-Service -Name "Tricerat*"
# Gateway (and Cloud Connector, if selected) should be running
Step 3: Verify connectivity
Test a client connection to the Gateway on port 4600. If you installed the Cloud Connector, open the ScrewDrivers Connector application on the internal connector and confirm each remote connector shows as connected.
Next steps
- TCP/IP clients: Configure TCP/IP clients via the Gateway.
- How it fits together: Enterprise Mobile Printing Architecture, Enterprise Remote/Cloud Printing Architecture, and the Cloud Connector reference.